Friday, July 22, 2016

Home Design Tips That Will Save You A Fortune Around The House

There is no doubt that it costs a lot of money to maintain your home. As a homeowner, you accept the fact that you have to pay thousands of dollars each month for the daily upkeep of your place. Obviously, you can afford the payments or else you wouldn’t reside at your residence. Still, like every other homeowner on the planet, you wouldn’t mind saving a few bucks. After all, a few dollars every month can go a far way in the long run. The question is: ‘can you save money, and if so, how? The answer is simple: with a few handy DIY tricks.

As it happens, there are a variety of home design tricks that can save you a fortune in home maintenance bills. All you need to do is figure out which ones apply to your home and get to work. To help you out, there is a list of design tips that are proven to save money below. Just take a look and see if there is any that are suitable.

Paint The Exterior
There is nothing better than a coat of paint when it comes to DIY. Paint is great for adding gloss and shine to property, and a tin only costs a few dollars. Well, now you can add money-saver to the list. It turns out that a few licks of paint will help you save money on your energy bills. How does it work? It works in two ways. The first way is that the right paint can reflect UV rays and the heat of the sun. As a result, the temperature of your property will drop without the need for an air conditioner. Or, if you want to add heat, you can paint it a dark, matte color. The dark, matte colors absorb the sun’s rays and increase the temperature. Either way, you can boost it or lower it without flicking a switch. The best way to manage it is to paint your home a reflective color in the summer and an absorbent one in the winter.

Fill Wall Cavities
Unfortunately, there are lots of houses that aren’t as effective as they should be when it comes to insulation. In fact, so many houses come together in a short space of time that the builders neglect a lot of important details. As a result, your home might have a lot of wall cavities. Wall cavities cost a homeowner a lot of money because they help dissipate the heat. So, all that energy you burn to get warm goes as the draft from outside mixes with the warm air and takes control. The key is to fill these cavities to stop the cold air from mixing with the warm air. To do that, you need to buy fiberglass insulation and get into the walls. Also, don’t forget about the attic and basement because they are culprits too. Any cavity that you can find needs filling if you don’t want to waste more money.

Chink The Wood
Most houses have log beams and paneling on the walls as wood is aesthetically pleasing. The only problem that you have with wood is the structural integrity. That doesn’t mean that your house is about to fall, but that it the wood doesn’t shield you from the outside. If the panels or beams have grooves, then you don’t have to worry about this problem. But, if they don’t, you will need to chink the wood. As the experts at Mountain Home Building Products say, the wind will blow through your home without the chinking. Follow the link to get info about Mountain Home Building Products. Think of chinking as a sealant that you put in between the beams to make your house tighter. With a sealant on the wood, you won’t waste as much money on pointless energy.

Insulate The Furnace
Furnaces or boilers are some of the most inefficient features of the home. A typical boiler can waste a large volume of energy in one day, which is very expensive. Obviously, you don’t want that to happen because you want to cut the cost of home living. Still, you need a furnace, so what are your options? You could replace the furnace with an energy-efficient model. The only thing with this method is that it is super expensive. It will save you money in the future, but it will take a while to see the savings. Another option is to perform a DIY trick that will prevent the boiler from emitting needless energy. To do it, you just need a roll of aluminum foil. If you wrap the foil around the furnace, the shiny surface will reflect the heat back. So, any energy that tries to escape goes straight back into the furnace.

Blinds Instead Of Curtains
Sometimes, saving money around the house is as easy as opening the blinds or curtains. Seriously, the heat from the sun is that strong, especially during the summer months. So many people turn on the furnace when they don’t need to and waste money. All you have to do is open the curtains and let the light flood into the room. The light contains UV rays, and these rays help boost the temperature. Blinds are a good option in this case as blinds allow you to control the amount of light. Curtains are big and bulky, and they catch the rays in their heavy fabric. As a result, they might reflect the heat or stop it from entering your home. If you open the window treatments early enough, you will feel the benefits by midday. At night, you want to do the opposite to keep the heat where it belongs. Otherwise, you will have to find another way to stay warm.

Keep The Windows Open
Would you rather keep cool? Don’t worry because that is just as easy as opening the blinds. Instead, you just have to open the windows. There is a fascination with air conditioners nowadays, yet the cost is extreme. An air conditioning unit can add an extra couple of hundred dollars a month onto your household bills. You don’t have to be a genius to work out that a couple of hundred dollars is a lot of money. Instead of turning on the air con, then, just jimmy open a window. On a breezy day, the draft will help you stay cool, and it won’t cost you a penny. Another DIY tip that you might want to consider is opting for single pane glass. Double-glazing is a firm favorite in most households for obvious reasons. But, it does add to the temperature as the extra pane prevents the flow of heat. A single pane of glass will allow the heat to flow more efficiently during the summer months. It is only a small change, but it might make all the difference.

Repair The Weather Stripping
The weather stripping is the material that you find on doors and windows. The point of the stripping is t prevent the flow of cold air into a room. In simple terms, it catches the cold and prevents drafts from occurring. For the most part, it is very effective. However, it does wear away after a while. If your doors and windows are old, they will probably need a new weather stripping material.  Fortunately, it is easy to do if you have a simple guide handy. The important thing to remember is to replace it every couple of years as doors and windows are a major source of heat loss. Caulking is also another effective tool that you can use if you have any at your disposal.

Fix The Door Threshold
Can you see the light at the bottom of your door? If you can, the threshold is coming loose. Just like the weather stripping, it is a preventive measure to help stop drafts. So, if it is loose, the energy wastage can get quite high and cost a lot of money. The simple answer is to fix the threshold, which will stop the draft from occurring. Any self-respecting DIYer will want to get on the case ASAP, but you shouldn’t rush. It is a tricky job to get right regardless of how easy it looks and sounds. If you get it wrong, you might compromise the integrity of the whole door.

Install A Fireplace
The best way to get energy is organically. Then, you don’t have to spend money cultivating the heat. You already know about opening the curtains and keeping the windows shut, so what are the other methods? One every effective method is to install a fireplace. When you burn wood in the fire, the heat can radiate through the whole house. Within a few minutes, you will be toasty warm. All you have to do is fix the chimney so that you don’t fill the house with smoke. Otherwise, you will need a fireplace and a gas mask!

As you can see, it is possible to save money with a handful of design tips. Implement these into your home and you will soon see the benefits.